STEP 4
Fix the link tube (pt.17) to the
main frame tube (pt.1) then
fasten the link tube (pt.17) to the
left frame tube (pt.19) using a
hex head bolt & washer (pt.21
&10).
Repeat
the
above
procedure for the right frame
tube (pt.20).
STEP 5
Attach the left and right frame
tubes (pt.19 & 20) to the main
frame (pt.1) as shown, using 4
carriage bolts, washers and
nylock nuts (pt.26,10 and 14)
make sure these are well
tightened.
remaining arm.
STEP 6
Connect one rower arm to the
frame using a hex head bolt, a
washer
and
a
nylock
nut
(pt.33,10 and 14). Then pull the
rubber sleeve down over the
joint.
Note: The handle on the arm
should point inwards with the
elbow bend pointing upwards.
Repeat this procedure with
remaining arm.
