- 12 -
connect to our DVR as follows(right):
Internal DVD Burner message appears only in Video Backup with MPEG4 format, please refer to
Chapter 4.6 Video Backup
For the internal fixed HDD installation, there is no HDD bay for it, there are 4 screw holes underneath
housing bottoms, where you can secure them as below:
3.3 PTZ Control Connections
Connect the PTZ control interface to RS485 T
X
+ and T
X
- interfaces of rear panel.
4. Power-on DVR and Quick Start
Power-on the DVR and wait for system program loading. The DVR will buzz and “NO Hard Disk” appears
when no hard disk installed in DVR. This DVR has dual display(TV/VGA monitor), but OSD control is
only side, default is VGA, you may press
“ESC” + “1” +”ESC” continuously from faceplate or remote
control to switch to TV mode
First
window will request
to
select user account
and
password to operate
DVR
system.
Please refer to PTZ setting section for
5.4.2 ~5.4.4 PTZ protocols, baud rates and IDs
Default password of Admin is [888888] User is [666666]
Data Cable
Power Cable
Data Cable
Power Cable