sparkfun ESP8266 Hook-Up Manual Download Page 7

Page: 7 / 13

Click the image for a closer look.

Arduino Board Support

Note:

This example assumes you are using the latest version of the Arduino IDE on your desktop. If this is

your first time using Arduino, please review our tutorial on installing the Arduino IDE. If you have not
previously installed an Arduino library, please check out our installation guide.

Before programming the WiFi IR Blaster's ESP8266, you'll need to install the ESP8266 Arduino board
definitions. The board definitions can be found in the ESP8266 Arduino GitHub repository. For installation
instructions, check out this section of the README.

The WiFi Blaster board definition is not included with the Arduino ESP8266 board files, but it can be uploaded to
as a Generic ESP8266 Module. Verify your settings look like below:

Board: Generic ESP8266 Module

Board

Generic ESP8266 Module

Flash Mode

QIO

Debug Level

None

Reset Method

CPU Frequency

80 MHz

Flash Size

4M (1M SPIFFS)

Debug Port

Disabled

lwIP Variant

v2 Prebuilt (MSS=536)

Crystal Frequency

26 MHz

Flash Frequency

40MHz

Upload Speed

115200

Summary of Contents for ESP8266














Search results

Summary of Contents for ESP8266

Reviews:

Related manuals for ESP8266

Brands by name

Popular brands

sparkfun ESP8266, Hook-Up Manual

Search results

Summary of Contents for ESP8266

Reviews:

Related manuals for ESP8266

Brands by name

Popular brands