(9) 3 switch inputs. Connect to GND for valid signal. The default is
the pedal safety switch input (to be configured via the customer
software), the brake switch input and the reversing switch input.
(10) Three 0-5V analog inputs. The default is the pedal analog
signal input, the brake analog signal input and the motor temperature
sensor analog signal input.
(11) The Boost switch can be configured. The controller will output
the maximum current, when the switch is turned on.
(12) The Economy switch can be configured. Limiting the
maximum drive current to the controller is half the normal
case, when the switch is turned on.
(13) The maximum current that can be configured half the
maximum forward current.
(14) Enhanced power generation brake function. The original ABS
brake technology, so that your brakes are more powerful
and smooth.
(15) 12V brake signal input can be configured.
(16) Motor over-temperature detection and protection (need to
use our designated semiconductor temperature sensor KTY84-130).
(17) 3-phase Hall position sensor input, open collector output
and the controller provides pull-up resistor.
(18) Controller power supply range is 8-30V optional.