Sparc E35202-05, Installation Manual

Page: 36 / 62

Power On the Host Through the CMM (Web Interface)
36 SPARC T5-1B Server Module Installation Guide • May 2014
Description Links
Through a terminal device connected to the front panel of the server
module (using the dongle cable), power on the host using the server
module SP Oracle ILOM CLI.
Method 3 (CLI) –
Through a terminal device connected to the CMM SER MGT port,
power on the host using the CMM Oracle ILOM CLI.
“Power On the Host Through the CMM SER MGT Port
(CLI)” on page 41
Related Information
■
“Plan Communication With the Server Module During Installation” on page 22
Power On the Host Through the CMM (Web
Interface)
You connect to the CMM through your network that is connected to the CMM NET MGT
Ethernet port. While this Ethernet connection supports both the Oracle ILOM CLI and the web
interface, this procedure uses the web interface.
This procedure assumes that the CMM Oracle ILOM is running version 3.1 or higher.
Note -
By default, the server module is configured to use DHCP to obtain the IP address for the
SP.
1. Ascertain the IP addresses for the CMM.
2. Ensure that the CMM is connected to the network you are on.
The network connection is through the RJ-45 connector labeled NET MGT 0 on the CMM.
3. In a browser on the same network as the modular system, enter the IP address
of the CMM.
For example, if your CMM has the IP address
129.99.99.99
, enter
http://129.99.99.99
into
your browser.
A login window for Oracle ILOM appears.
4. Log into Oracle ILOM on the CMM by typing your user name and password.
The factory default Oracle ILOM
root
password is
changeme
, but might have been changed in
your environment.
5. In the upper left corner, change Manage Chassis to Manage Blade
n
.