Sparc E35202-05, Installation Manual

Page: 48 / 62

Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)
48 SPARC T5-1B Server Module Installation Guide • May 2014
6.
Select Reset from the pull-down menu, and click Save.
7.
In the left navigation panel, click on Remote Control > Redirection.
8.
Select Use Serial Redirection, and click Launch Remote Console.
As the host resets, messages are displayed in the serial console. The reset activity takes a few
minutes to complete. When the
ok
prompt is displayed, continue to the next step.
9. At the ok prompt, boot from the appropriate boot media for your installation
method.
For more information, refer to the Oracle Solaris installation guide that corresponds to your
desired release and installation method.
■
Installing Oracle Solaris 11 Systems , comparing installation options at:
http://www.oracle.com/goto/Solaris11/docs
■
Oracle Solaris 10 Installation Guide: Planning for Installation and Upgrade , choosing an
Oracle Solaris installation method at:
http://www.oracle.com/goto/Solaris10/docs
For a list of valid boot commands, type.
{0} ok
help File
boot <specifier> ( -- ) boot kernel ( default ) or other file
Examples:
boot - boot kernel from default device.
Factory default is to boot
from DISK if present, otherwise from NET.
boot net - boot kernel from network
boot cdrom - boot kernel from CD-ROM
boot disk1:h - boot from disk1 partition h
boot tape - boot default file from tape
boot disk myunix -as - boot myunix from disk with flags "-as"
dload <filename> ( addr -- ) debug load of file over network at address
Examples:
4000 dload /export/root/foo/test
?go - if executable program, execute it
or if Forth program, compile it
Related Information
■
“Configure the Preinstalled OS” on page 44
■
“Reach a State to Install a Fresh OS (Oracle ILOM CLI)” on page 49
■
“Assign a Static IP Address to the SP” on page 50