35
8.4 LED FUNCTIONING
The communication interface’s Led of the PC/Touch have
the following functionality:
•
YELLOW LEDS
: If the small 5 Leds (1 on the base
of the arm and 4 under the second part of the arm)
of the TOUCH arm are lit up and they don’t flash, it
means that the TOUCH is correctly supplied and the
program of measure is not activated. If the Led flash,
it means that the program of measure communicates
with the arm TOUCH. If instead the Led don’t start, it
means that the TOUCH arm is not correctly supplied.
It’s better to verify all the connections and verify that
the Led introduced in the communication interface
PC/TOUCH work correctly.
•
GREEN LED
: If the LED is lit up the arm is on.
•
RED LED
: when the red LED is flashing the battery
is charging. When the LED is steady that means it is
fully charged.
•
BLUE LED
: it flashes if the arm communicates with
the Test Touch program or with the Touch software.
TOUCH / A03
DC001630
Pag. 24 di 28
8.4
LED FUNCTIONING:
The communication interface’s Led of the PC/Touch have the following functionality:
Yellow LEDS
: If the small 5 Leds (1 on the base of the arm and 4 under the second part of the arm) of the TOUCH arm are lit up and
they don’t flash, it means that the TOUCH is correctly supplied and the program of measure is not activated. If the Led flash, it means
that the program of measure communicates with the arm TOUCH. If instead the Led don’t start, it means that the TOUCH arm is not
correctly supplied. It’s better to verify all the connections and verify that the Led introduced in the communication interface PC/TOUCH
work correctly.
Green LED
: If the LED is lit up the arm is on
Red LED
: when the red LED is flashing the battery is charging. When the LED is steady that means it is fully charged
Blue LED
: it flashes if the arm communicates with the Test Touch program or with the Touch software.
Indications For Battery
When the charger is not connected the battery it will last for approximately 8 hours. Whenever the Touch Arm is plugged into 110 volts
the battery status is verified and, if necessary, automatically recharged. The Touch is equipped with a battery safeguard that stops the
recharge of the battery at its maximum charge level. For a complete charge of the battery it is necessary that the Touch remains
connected to 110 volts for at least 10 hours.
Indications For Battery
When the charger is not connected the battery it will last
for approximately 8 hours. Whenever the Touch Arm is
plugged into 110 volts the battery status is verified and,
if necessary, automatically recharged. The Touch is
equipped with a battery safeguard that stops the recharge
of the battery at its maximum charge level. For a complete
charge of the battery it is necessary that the Touch remains
connected to 110 volts for at least 10 hours.
Fig. 7
