PROBLEMS
CAUSE
SUGGESTIONS
Water Pump Failure
Disconnection with power supply;
disconnection of the leakage
protector
Reconnect the bathtub with
power supply; reconnect the
leakage protector
Electricity supply is abnormal
Inspect electricity supply
The control box is broken
Change it
The pump impeller is blocked by
rubbish
Clean the pump
The water pump is broken
Repair or change it
The control panel is broken
Change it
Air Pump Failure
Disconnection with power supply;
disconnection of the leakage
protector
Reconnect the bathtub with
power supply; reconnect the
leakage protector
Electricity supply is abnormal
Inspect electricity supply
The control box is broken
Change it
The pump impeller is blocked by
rubbish
Clean the pump
The air pump is broken
Repair or change it
The control panel is broken
Change it
No water jet
(the water pump
is intact)
The pump impeller is broken
Change it
The water circulation is jammed or
leaks
Clean the water circulation
system or repair the leakage
Failure to control the
water strength
Abnormal voltage
Inspect the voltage
The water circulation is jammed
Clean the water circulation
system
The bathtub is uneven
The screws of the foot stand are not
well placed
Adjust the screws
Water pipe leakage
Seal failure
Change it
Screw unlocked
Lock it
Joint disconnected
Reconnect it
Side panel installation
failure
Adjust the panels of each side to fit the screw holes
Control panel failure
The bathtub is disconnected from
the control box
Reconnect the bathtub to the
control box
Control panel failure
Repair or change it
The control panel is broken
Change it
11
