Windows 95 Software Installation
Windows 95 Driver Installation
The first time you run Windows 95 follow this procedure:
1. Log on to Windows 95.
2. Windows 95 Plug-and-Play capabilities will detect
“OPTi Audio 16”
and search for the
drivers for the new hardware.
3. Insert the HOT-671 Installation CD into your CD-ROM drive and click
Next
to continue.
Windows 95 will search all the available drives for an appropriate device driver.
Direct the Installation to :
D:\Opti933\Win95\English (or German, French, Chinese,. . )
for Windows 95 Driver
or
D:\Opti933\Cybersyn
for CyberSynth Software Wavetable Windows 95 Driver..
4. System will now install the 82C933 driver. After driver installation, system will prompt
you to restart the computer.
Note:
Depending upon the original Windows 95 installation choices, you may be asked to
insert the original Windows 95 CD-ROM in the system during the installation process to
install all the appropriate files.
Using Software Wavetable
To use the software wavetable, you can either use
Windows 95 MediaPlayer or HOT-671 bundled
MediaRack. For the utilization of audio tuning
functions, we recommend MediaRack.
To play MIDI file by software wavetable in
MediaPlayer, you need to select
“Device”
, then
“Properties”
. Select
“CyberSynth”
to switch the
MIDI device to OPTi-CyberSynth Software
Wavetable. You cannot change device selection
while you are playing a MIDI file in MediaPlayer.
In MediaRack, you can switch different output
MIDI devices while playing a MIDI file. Click
the
“MIDI”
in the tool bar, then
“Select Output”
to switch between different MIDI devices. Due to
the nature of software wavetable, you will feel
sound volume decrease after you change the
output to the software wavetable. You can in-
crease sound volume by adjusting the Master
Volume slide bar.
You can adjust the Chorus and Reverb sound
effect for MIDI output in CyberSynth Software
Wavetable. Go to
Control Panel
, and double
click the
“CyberSound Settings”
icon to launch
the effect control desk.
47
