19
HOT-671 mainboard provides an optional power-on function by stroke any key (or hot-key)
on keyboard or double click on PS/2 mouse.
Note: Power-on by serial mouse is not supported
JP1 and JP4 are the jumpers used to set the functions of keyboard & PS/2 mouse power-on
Enabled or Disabled.
When you enabled K/B & PS/2 Mouse Power-ON function, you also have to set the proper
item on
POWER ON function
category of
Integrated Peripherals
of BIOS setup.
Keyboard & PS/2 Mouse Power-On Setting (option) - JP1, JP4
Connectors
Front Panel Connectors
Hardware Reset Connector - J16
Attach 2-pin hardware reset switch to it. Closing the
reset switch restarts the system.
Speaker Connector - JP9
PC speaker connector may attach a 4-pin PC speaker
cable from the case to this connector.
HD LED Connector - S3
Attach a 2-pin IDE drive LED cable to this connector.
The LED lights when an IDE device is active.
Figure 2-12
Table 2-4
K/B & PS/2 Mouse Power-On JP4
Keyboard &
PS/2 Mouse
Power-On
Disabled
PS/2 Mouse
Power-On
Enabled
Keyboard &
PS/2 Mouse
Power-On
Enabled
Keyboard
Power-On
Enabled
