3.3.6 PING test
Connect the cable to the LAN port, click icons to enter, select setting local IP,IP address of the
remote host, Packet Size, Packet time Timeout etc, press “Start “to test. if IP camera or other network
equipment is not connected to the tester, show sending and receiving packet ‘s quantity
inconsistencies
，
Error rate 100%
，
if connect well, to start Ping test ,if the test device’s IP address is
correct, sending and receiving packet ‘s quantity consistencies
Application
：
PING testing is the most conventional network debugging tools. It is used for testing if
the connected IP camera or other network equipment’s Ethernet port is working normally and the IP
address is correct.
It’s normal that the first data packet will be lost when test start.
3.3.7 Cable test
Click icons “ ”to enter
Page.40.
