be created according to the date.
2.3.1
3
DHCP dynamic address assignment
Built in DHCP server, dynamic assign address for the IP camera or network device
2.3.14 the dynamic address accessed
T
ester can accessed IP address assignment from DHCP, as the tester’s IP address, so not need manual
set it.
2.3.15 Multi- segment IP Camera Test
Support Multi- segment Static IP address setting,
，
Can simultaneously test different segments IP
network cameras
2.3.16 IP address scan
In digital IP surveillance applications, if IP camera’s IP address is not clear or forgotten; the device
cannot be used .IP address scan can quickly search the connected IP camera or other network device’s
IP address.
2.3.17 PING Test
PING is the most conventional network debugging tools; It is used for testing if the connected IP
camera or other network equipment’s Ethernet port is working normally and the IP address is correct.
2.3.18 Port Flashing
The tester will send special signals to make the connected POE port flicker at special frequency, which
will enable the installers to easily and quickly find the connected ethernet cable. This function can
prevent mistakenly insertion or disconnection non-corresponding cable to artificially interrupt network
connection.
2.3.19 PoE Test
It can test the PoE voltage when the POE switch is supplying the POE power to IP camera. It can
clearly display the power+ and power- on the Ethernet cable pins, each cable pin’s voltage and the
failure connection of cable pin series numbers.
Page.7.
