local IP
：
it means tester’s IP address, support Multi- network segment IP camera test ,click “deploy “
to enter “IP setting “ and set the tester ‘s IP address, can add IP address of the Different network
segments, click “set” to save , click icons to close it and return IPC test interface.
IP camera type
：
support Honeywell , Samsung, Honeywell , Samsung, Kodak,Tiandy, Aipu-
waton,VVS, ACTi
、
WoshiDA camera etc.
If the official provide original protocols, Pls select camera
type, input IP camera address ,user name and password ,click” official” to enter the camera image
display interface(Currently, only supported protocol official protocols of DAHUA )
IPC Camera's address:
Enter IP camera’s IP address , click “deploy”to add IP address of the Different
network segments, support Multi- network segment IP camera test .
Click “search” to auto-scan the IP camera’s IP address and display. The tester and IP
cameras connect directly, and then scanned address is only, if not direct connection,
scanning Multiple IP addresses.
IPC User Name
: Enter IP camera’s user name
IPC Password:
Enter IP camera’s login password, if default enter password, not show relevant letters,
if click “display” to show it.
IPC Port No.
：
Select IP camera type, it default relative camera port number, and not need change.
After setting, click “login” to enter imager interface.
Page.38.
