(1) PTZ controller parameter setting
Select and click icons “PTZ”
，
to enter PTZ setting
：
Use the up and down arrow keys to move the yellow cursor to the “
”, set corresponding
and support more than thirty PTZ protocols. Such as Pelco-
D
、
Samsung
、
Yaan
、
LiLin
、
CSR600
、
Panasonic
、
Sony-EVI etc.
B. Port
Click and move, to “port” Select the communication port for the PTZ camera controlling (RS232/485)
C.
Baud
Move the yellow cursor to “Baud”
，
Select the baud rate according to baud rate of the PTZ camera.
(150/300/600/1200/2400/4800/9600/19200/57600/115200)
D. Address
Set the ID according the ID of PTZ camera (0~254), the setting address data must be consistent the
speed dome address.
Page.20.
