2
Installation and Setup
Cleaning and Preparation
Operation
Unpack and inspect
machine, parts, and
accessories
.
Place machine in appropriate food
preparation area. Comply with all
installation requirements.
Read and understand
ALL safety and standard
operating procedures.
Fully disassemble machine,
and prepare parts for
cleaning
.
Thoroughly clean and scrub
machine hoppers, cylinders,
and all parts.
Lubricate and re
-
assemble
all machine parts.
11
Prepare product in a sepa-
rate container, and ensure
product is thoroughly mixed.
Add product to hoppers
and prime the cylinder
using the prime plug
.
Turn machine to FREEZE
mode, and wait for product
to reach frozen consistency.
Slightly adjust viscosity
setting as necessary to
adjust product firmness
.
Check for shipping damage
Inspect the machine for any shipping damage. If you find any, contact Spaceman Technical Service immediately
after unpalletizing. Our technicians will help you assess the damage and determine the appropriate action prior
to accepting the delivery.
Unpalletize Machine
1.
Cut packing straps, and remove cardboard lid and outer sides from the pallet. DO NOT cut cardboard.
2.
Remove plastic wrapping around machine.
3.
Cut stabilizing straps, being careful not to scratch or dent the machine panels.
4.
Prepare the area where the machine will be placed, remove packing cardboard from underneath machine,
and place ramp wedges near front casters.
5.
Unlock front casters, and roll machine down the wedges off the pallet.
6.
Place the machine in its final location according to the Installation Requirements.
Warning
: Unpalletizing requires lifting.
Two or more personnel should remove the machine
from its packaging and place it in its final operating location.
Failure to do so may result in
severe injury or damage. Inspect equipment for hidden damage before signing for delivery.
Unpack and inspect parts
Refer to the detailed parts diagrams on the back pages if necessary.
1.
Remove all packaged parts and accessories from your machine.
2.
Organize items on a clean table or operating area using the checklist
.
3.
Inspect for damage immediately upon unpacking and call Spaceman
Technical Service if you discover any damaged or missing parts.
4.
Clean and properly lubricate machine parts prior to machine operation.
Included Parts:
•
Hopper Cover (1 or 2)
•
Front Drip Tray + Splash Shield
•
Dispensing Handles (1 or 3)
•
Retention Pin with Nut
•
Start
-
Up Kit
•
Operator’s Manual
Quick Operation Guide
10
9
8
7
6
5
4
3
2
1
Fully sanitize machine.