Spacelabs Healthcare 98000, Operation Manual

Page: 81 / 122

070-2567-03 Rev. A
15-3
3. Enter desired frequency parameter settings, as needed. The default is 5-minute epochs
every 10 minutes.
4. Click OK.
5. With the Pane view enabled, click the RR Intervals screen.
6. Click the Power Spectrum icon.
7. In the Period text box, select a period of time from 2 minutes to 24 hours. This period
indicates the time period in which beats are brought into the analysis. (The time displayed
to the right of the period shows the Start and End time associated with the period
selected).
15.6 Viewing On-screen Epoch Reports
After performing Frequency analysis, you may wish to view the on-screen epoch reports that
were selected for Frequency analysis.
To view epoch reports:
1. Click the desired epoch report you wish to view (located on the left pane under RR
Intervals).
2. The report displays with the analysed R-to-R interval data.
3. Use the toolbar at the top of the screen to enable and view different parts of the Report.
4. The screen defaults with the Details button enabled (which shows details of the report).
5. If you wish to change the duration of the epoch, click the down arrow in the Period box
and select a period from 2 minutes to 24 hours.
6. To change more details of the report, click the >> arrow. After clicking this arrow, more
options are available that allow you to change parameters of analysis. Click on the down
arrow of the desired boxes to choose a parameter.
7. If you wish to display the ECG and Heart Rate Trend, click on the corresponding buttons
on the toolbar (at the top of the screen), as needed. When these are enabled, click in
either the Trend or Power Spectrum (at the bottom) to see the associated ECG (at the
top) for that specific time period.
8. If you wish to delete a report, click on the report title on the left pane, and then click the
“X” button on the toolbar at the top of the screen. A confirmation box displays asking if
you want to remove the selected report. Click Yes to remove the report, or click No to
Cancel this action.