Spacelabs Healthcare 98000, Operation Manual

Page: 44 / 122

Pathfinder SL v1.9 Operations Manual
6-2
2. Press and hold the left mouse button while moving the mouse cursor up and down to
change the row height.
6.1.1 Dragging ECG Events
You can move or re size some ECG Events(such as the start and end points on an SVT) by dragging
the ECG Event lines.
To move the entire event, left-click and drag somewhere in the middle of the ECG Event
line.
To move the start, left-click and drag near the start of the ECG Event line.
To move the end, left-click and drag near the end of the ECG Event line.
The mouse cursor will change to indicate whether you will drag or re size the ECG Event.
If you hold down the Control key while you drag, you will move the ECG Event instead of re sizing it.
This is useful if the ECG Event is so short that it is difficult to click in the middle of it without being
so near one of its ends that a re size is done instead
6.2 Keyboard
There are a number of Windows based keyboard commands in the analyzer:
Command Functions
5
(This is the ‘5’ key on the numeric keypad.)
If there is a selected ECG marker, the display will be centred on that ECG
marker, otherwise the display will be centred on the ECG cursor.
[
Slides ECG to the left.
“Ctrl and [”: Slide ECG to the left by a greater amount.
“Alt and [”: Slide ECG to the left by a lesser amount.
]
Slides ECG to the right.
“Ctrl [”: Slide ECG to the right by a greater amount.
“Alt [”: Slide ECG to the right by a lesser amount.
↑
Move ECG cursor up one row.
↓
Move ECG cursor down one row
Ctrl ↑
Scroll display up one row.
Ctrl ↓
Scroll display down one row.
←
Move ECG cursor left.
“Ctrl ←”: Move ECG cursor left a large amount.
“Alt ←”: Move ECG cursor left a small amount.
→
Move ECG cursor right.
“Ctrl ←”: Move ECG cursor right a large amount.
“Alt ←”: Move ECG cursor right a small amount.