SPACECAM
SYSTEMS, INC.
MAXIMUS 7 OPERATOR’S MANUAL
August 17, 2016
6.4 Maintenance Tool main screen
The main screen is a standard Window’s screen. The version number of the software is on the top in the
header. Under the header the connected port number is displayed with a small moving bar to indicate
that the connection is active.
There are 5 tabs.
The Gimbal tab, that gives information on the current status of the gimbal and also can be used to do
some debugging.
The Servo Parameters tab has all the servo loop parameters specific to individual axes.
The General Parameters tab shows parameters that do not belong to a specific axis.
The Err&Info tab displays error counters and other information of the system.
The Flash tab has tje tools to make quick software updates of the Gimbal Controller board.
6.5 Saving the parameters
The relevant (user alterable) parameters can be saved in a file by clicking on the File roll-down menu on
the top-left of the screen then clicking on the “Save All Parameters” menu item.
6.6 Printing the parameters
The relevant (user alterable) parameters can be printed by saving them in a file, then by clicking on the
File roll-down menu on the top-left of the screen and then clicking on the “Print File” menu item. The
PC must be connected to a printer or a network that has a printer.
31240 La Baya Dr. Ste. A
Westlake Village, CA. 91362
818-889-6060
Page 58 of 74
