INSTRUCTION, USE AND
MAINTENANCE MANUAL
Page 26 of 45
GB
IN ORDER TO ALLOW THE AIR
JET TO BREAK BOTH BEADS,
DO NOT KEEP THE BEAD LIFTED
FORCING IT.
Fig. 24
12.10 Version with pneumatic balancing (on
demand)
On the automatic column a handle equipped with a
pneumatic control is housed to allow the locking/un-
locking and the motion of the vertical arm. Pushing
the push-button located on this handle (see
Fig. 25
)
the following operations can be carried out:
1
st
tripping:
vertical arm descent;
2
nd
tripping:
locking of the vertical and horizontal arm
in working position;
3
rd
tripping:
unlocking of vertical and horizontal arm
and rise of vertical arm in rest position (all
upward).
Fig. 25
12.10.1 Demounting
After clamping the wheel, the tyre is demounted fol-
lowing the instructions given below, with reference to
Fig. 26
.
1. Press the rotation pedal to rotate the wheel clock-
wise until the valve stem reaches “ hour 1” position.
2. Release the arm using the push-button placed on
the barrel handle until the 3
rd
tripping and releas-
ing arms.
3. Position the demount/mount arm on the outer edge
of the rim pushing the push-button until the 1
st
tripping.
4. Lock it in position acting again the push-button
until the 2
nd
tripping.
5. Proceed with the operations, following the indica-
tions in chapter 12.6 starting from step 4.
Fig. 26
Space s.r.l.
7300-M009-0_P
GA2645 - GA2645D - GA2645V
