Space GA2645. Series Instruction Manual Download

Page: 23 / 86

INSTRUCTION, USE AND

MAINTENANCE MANUAL

Page 23 of 45

12.7 Adjusting descent of the hexagonal

shaft (on demand)

On models with pneumatic movement of the hexagonal
arm, in order to adjust the descent speed, please follow
the instructions listed below (see

Fig. 20

1. Regulators

and

are pre-calibrated at the ware-

house.

2. To modify the descent speed of the tool shaft, please

follow the instructions listed below:
• Unscrew nut

• Press and release the push-button placed on the

handle repeatedly in order to move the hexagonal
shaft downward and upward and set the speed
through nut

so that the descent of the hexagon

is slower than the rising or equal. To slow the
descent, rotate nut

counterclockwise. To speed

the descent, rotate nut

clockwise.

3. When regulation is done, lock the arm in an inter-

mediate position acting the button, then unlock
the arm to the rest position. Start the arm descent
pressing the button and check if the speed descent
is the same as previously scheduled.

4. Screw nut

5. To vary the tool arm rising speed, please follow the

instructions listed below:
• Unscrew nut

• Press and release the push-button placed on the

handle repeatedly in order to move the hexagonal
shaft downward and upward and set the speed
through nut

To slow the rising, rotate nut

counterclockwise.

To speed the rising, rotate nut

clockwise.

6. Check if the speed descent is the same as previously

set. If not, please repeat operations b) c) d).

7. Screw nut

Fig. 20

Space s.r.l.

7300-M009-0_P

GA2645 - GA2645D - GA2645V

Summary of Contents for GA2645. Series























































































Search results

Summary of Contents for GA2645. Series

Reviews:

Related manuals for GA2645. Series

Brands by name

Popular brands

Space GA2645. Series, Instruction Manual

Search results

Summary of Contents for GA2645. Series

Reviews:

Related manuals for GA2645. Series

Brands by name

Popular brands