INSTRUCTION, USE AND
MAINTENANCE MANUAL
Page 13 of 45
GB
2. Connect the flexible pipes (
Fig. 9A-9B ref. 1
)
preassembled on the mandrel rotary distribu-
tor (
Fig. 9A-9B ref. 2
), on the valve (
Fig. 9A-9B
ref. 4
) hosenipple (
Fig. 9A-9B ref. 3
). Fasten the
pipes (
Fig. 9A-9B ref. 1
) with the prepared clamps
(
Fig. 9A-9B ref. 5
).
3. Connect the pipe (
Fig. 9A-9B ref. 14
) from the
greaser reduction gear filter (
Fig. 9A-9B ref. 7
)
(air not lubricated) to the pedalboard (
Fig. 9A-9B
ref. 12
).
4. Connect the pipe (
Fig. 9A-9B ref. 11
) from the
pedal board lower valve (
Fig. 9A-9B ref. 12
) to the
blow valve (
Fig. 9A-9B ref. 4
) union (
Fig. 9A-9B
ref. 13
)
5. Connect the pipe (
Fig. 9A-9B ref. 6
) to the T cou-
pling (
Fig. 9A-9B ref. 8
) and the coupling (
Fig. 9A-
9B ref. 16
) placed on the tank (
Fig. 9A-9B ref. 9
).
6. Connect the pipe (
Fig. 9A-9B ref. 10
) from the valve
(
Fig. 9A ref. 15
) or the microregulator (
Fig. 9B
ref. 15
) to the pedalboard (
Fig. 9A-9B ref. 12
).
7. Connect the pipe (
Fig. 9 ref. 17
) from the valve
(
Fig. 9A ref. 15
) or the microregulator (
Fig. 9B
ref. 15
) to the inflation unit (
Fig. 9 ref. 18
).
Fig. 9A
10.3 Bead breaker arm mounting
Secure the beading arm vane (
Fig. 7 ref. 1
) using the
washers (
Fig. 7 ref. 2
) and the nut (
Fig. 7 ref. 3
),
on issue (nut and washers are clamped on the bead
breaker vane).
Fig. 7
10.4 Tubeless inflation mounting (only for
I and IT version)
1. Mount the tank (
Fig. 8 ref. 1
) on the base rear part,
as shown in
Fig. 8
, using the screws (
Fig. 8 ref. 2
)
(tightening torque approx. 8 N·m), the washers
(
Fig. 8 ref. 3
) and the nuts (
Fig. 8 ref. 4
).
2
2
1
3
4
3
4
Fig. 8
Space s.r.l.
7300-M009-0_P
GA2645 - GA2645D - GA2645V
