Space-Ray SRP 08, Installation, Servicing And Operating Instructions, Page: 8 / 26

Page 6 of 24
3.1.6 Minimum clearance from combustibles.
Fig. 2
MODEL HORIZONTAL 45
0
ABOVE BELOW SIDE
FRONT BACK FRONT BACK
SRP08 610mm 610mm 865mm 205mm 915mm 1220mm 610mm
SRP15 915mm 915mm 1830mm 305mm 915mm 2590mm 1145mm
SRP22 1145mm 1145mm 2085mm 305mm 915mm 2975mm 1270mm
SRP30 -DEEP 1375mm 1375mm 2365mm 305mm 915mm 3355mm 1525mm
SRP30 - PARABOLIC 1880mm 1880mm 3025mm 305mm 915mm 4270mm 1905mm
3.2 Gas Supply
3.2.1 Natural Gas - G20 at 20mbar supply pressure (appliance cat 2H).
Maximum supply pressure (Pmax)- 25mbar
Minimum supply pressure (Pmin) - 17mbar
Setting Pressure - 12.5mbar
Gas Connection - Rc - ½
3.2.1.1 Installation pipes should be fitted in accordance with National and Local Regulations. Pipes of a smaller size
than the appliance connection (Rc - ½) should not be used and the pipework must be designed to achieve a
gas supply pressure between the maximum and minimum valves stated above, measured at the appliance inlet
pressure test point.
A union service cock MUST be fitted as close as practicable upstream of the appliance to enable
the gas train to be removed for maintenance or repair.
It is essential to provide a flexible metallic hose, which must conform to National or Local
Regulations, to connect the appliance to the gas supply. Minimum size to be ½" (12.7mm) bore.
45° max
Above
Below
Below
Side Side
Back
Front
Back
Front
Above
Above