Form #42710000
-8-
May 2013
10.0)
OPENING THE 15’ BODY PACKAGE
Follow the procedure below to open the 15’ body package.
1.
Remove end reflectors from packaging.
2.
Lift the tube at the flange end, the slide tube support/hanger bracket between marks on tubes and tighten
the “U” bolt hex nuts. Follow instructions in Section 10.1 for the field assembly of the heater.
88 reference
Remove end reflectors
from packaging.
Slide tube support/hanger bracket between
marks on tubes and tighten the U bolt
hex nuts.
1
2
Lift this end.
6
reference
82 reference
