Space-Ray LRDL15, Assembly, Installation And Operation Instructions

Page: 32 / 51

Form #44201117
Dec 2021
-31-
Multiple Heaters per Thermostat connection diagram
Fig. 25
Notes: The method of connection to the electrical supply must facilitate complete isolation and should
preferably be via a fused double pole isolator having a constant separation of at least 3mm in all poles and
supplying the appliance ONLY.
Alternatively, connection may be made via a fused 3 pin plug and un-switched, shuttered socket, both
complying with the requirements of National or Local Regulations. Neither thermostat nor switch are
supplied as standard equipment. NOTE: In the event of an electrical fault after installation of the appliance,
preliminary system checks are required to be carried out i.e. earth continuity, polarity and resistance to earth.
Internal Wiring Diagram
Fig. 26