SP VirTis BenchTop 2K, Operator'S Manual

Page: 53 / 56

Appendix
C
Revision 004, 12/09
43
© SP Industries, Inc. 2009
Appendix C: Stainless Steel Cleaners
The following table lists possible problem situations and suggests
corrective actions. For additional information, contact SP Industries.
Cleaning Required Cleaning Agent
11
Application Method
12
Effect on Finish
Penny-Brite or
Copper-Brite
Use in direction of
polish lines on No.4
(polished) finish. Wipe
with dry cloth.
May scratch No.2 (mill) and
Nos.7 and 8 (polished)
finishes.
Paste Nu-Steel, DuBois
Temp, Tarnite, or Kelox Rub with dry cloth or
stainless steel wool.
Use in direction of polish
lines on No.4 (polished)
finish. May scratch No.2
(mill) and No. 7 and 8
(polished) finishes.
Revere Stainless Steel
Cleaner, Take-Off, or
AC-60
Apply with damp
sponge or cloth.
Use in direction of polish
lines on No.4 (polished)
finish. May scratch No.2
(mill) and Nos.7 and 8
(polished) finishes.
HEAT TINT OR HEAVY
DISCOLORATION.
Allen Polish, Steel
Bright, Wyandotte,
Bob-O, Zud, Dubrite, or
Prepare Dex
Rub with a damp cloth.
Use in direction of polish
lines on No.4 (polished)
finish. May scratch No.2
(mill) and Nos.7 and 8
(polished) finishes.
TENACIOUS DEPOSITS,
RUSTY
DISCOLORATIONS,
INDUSTRIAL
ATMOSPHERIC STAINS.
Oakite No.33, Dilac,
Texo 12, Texo N.Y.,
Flash-Klenz, Caddy
Cleaner, Turco Scale
4368, or Permag 57
Swab and soak with
clean cloth. Allow to
stand 15 minutes or
more, per directions on
package. Then rinse
and dry.
Satisfactory for use on all
finishes.
Vinegar
Swab or wipe with cloth.
Rinse with water and
dry.
Satisfactory for use on all
finishes.
HARD WATER SPOTS
AND SCALE.
Dilac, Oakite No.33,
Texo 12, Texo N.Y
Swab with cloth or soak.
Let stand 10-15
minutes. Always follow
with neutralizer rinse,
and dry.
Satisfactory for use on all
finishes. Effective on
tenacious deposits or
where scale has built up.
11
Use of proprietary names is only intended to indicate a type of cleaner, and does not constitute any endorsement (nor does
omission of any proprietary name imply its inadequacy). All products should be used in strict accordance with instructions and
warnings on the product package.
12
In all applications, a stainless steel wool, sponge, fibrous brush, or pad is recommended. Avoid use of ordinary steel wool or
steel brushes for scouring stainless steel.