3
!
WARNING.
• Only plug the cable into an appropriate USB outlet for charging.
• Before re-charging, read all instructions.
• Do not operate in direct sun light or extreme temperature conditions.
• The use of an attachment, not recommended or sold by the charger manufacture may result
in a risk of fire, electric shock, or injury to persons.
• While recharge, make sure the cord is located so that it will not be stepped on, tripped on,
tripped over, or otherwise subjected to damage or stress.
• Do not attempt to recharge with damaged chord or plug, replace them immediately.
• Do not wipe plastic parts with solvent. Solvents such as gasoline, thinner, benzene, carbon
tetrachloride, alcohol, ammonia and oil containing chloric annex may damage and crack
plastic parts Cleaning must be done when the charger is unplugged -Wipe plastic parts with a
soft cloth lightly dampened with soapy water
• Do not disassemble charger or battery pack, take it to a qualified service centre when repair
is required. Incorrect reassembling may result in a risk of electric shock or fire.
• Operating temperature, -10°C to +40°C
• Completely charge the light before using for the first time.
• Do not look directly into the light.
