DVI Lighting
120 Great Gulf Drive, Concord
Ontario, L4K 5W1 Canada
T: 1 855 384 5483
F: 1 855 384 8435
facebook.com/
dvilighting
@
dvi.lighting
@
dvilighting
pinterest.com/
dvilighting
www.
dvi
.lighting
FOLLOW US:
DVP43071
DVP43072
BRECON
Tools
Phillips head screwdriver
Warning
All electrical connections must be made according to local
codes. If you feel you do not have the experience necessary
to do this, please have your fixture installed by a qualified,
licensed electrician.
Make sure to note the maximum recommended wattage for
your light fixture.
DO NOT EXCEED THE RECOMMENDED WATTAGE:
DVP43071 - 2 x 25W GU10
DVP43072 - 2 x 25W GU10
Cleaning
We recommend that you use a mild detergent, such as dish
washing soap, and warm water to clean the glass and metal
surfaces. After cleaning, make sure to dry the fixture
completely because moisture will corrode the satin finish.
Use a damp soft cloth to wipe off dust. DO NOT use
abrasive pads or cleaning materials.
During installation, some fixtures may require subtle
adjustments in order for the fixture to look as intended.
If you have and questions,comments, or concerns
contact us at [email protected]
These instructions are property of DVI Lighting. Do not copy or reproduce.
ASSEMBLY INSTRUCTIONS
RENOVATING
YOUR HOME?
Snap a photo of your
fixture in your home
and tag us on our
social media for your
chance to be
featured!
1
2
3
Connect the copper ground wire to
ground wire - If you only have two
wires coming from the electrical
box, connect the fixture’s copper
wire to the green ground screw on
the mounting plate.
Connect the white fixture wire to
white supply wire.
Connect the black fixture wire to
black supply wire.
A.
B.
C.
A
B
C
