15
SHUT OFF PROCEDURE:
1. Release spray gun trigger and let engine idle for two minutes
2. Move the engine stop switch to the “stop” position. The engine will stop immediately.
3. Turn water supply off.
4. Turn Fuel Tap off.
5. Always point spray gun in safe direction, pull trigger to release retained high water pressure
before undoing hose and trigger from pump.
The spray gun and hose traps high water pressure even when engine is stopped and water
disconnected.
HIGH PRESSURE OPERATION:
Never pull the hose to move the unit. This could damage hose and/or pump inlet.
Never allow pump to run with water hose turned off or kinked. Shutting off the water supply to the pump
while it is operating may cause serious pump damage.
Do not let hoses contact HOT engine muffler during or immediately after use, as this will damage the
hose.
Interchangeable Nozzles :
•
Pull back the quick connect lock ring, firmly insert the desired nozzle and then release the lock ring.
•
Make sure the spray nozzle is properly locked in place with its quick coupler, if the collar is not
(Forward) in the locking position, the nozzle may become a dangerous projectile. The O-ring from your
quick coupler socket may also be blown out of place.
To
prevent damage to your surface to be cleaned always start with lowest pressure
nozzle size (white) and continue changing to the higher nozzle size until the best
work result is achieved.
Pressure washer produces fluid pressures and velocity high enough to penetrate
human and animal flesh which could result in series injury or amputation. DO NOT
point pressure washer in direction of people or animals. High velocity fluid spray
can cause objects to break, propelling particles at high speeds.