background image

11

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

•    Turn the power switch to the “ON” (|) position. 

The unit will turn on for 1 - 2 seconds and shut 

off. This is a normal function of the auto start 

feature. Squeeze the spray gun trigger to begin 

pressure washing.

•   Begin pressure washing by squeezing the trigger 

on the spray gun all the way into the handle. 

•   Release the spray gun trigger to stop the pressure 

washer.

•   Allow the motor to come to a complete stop 

before squeezing the trigger again.

•    Squeezing rapidly will cause the auto start 

feature to miss an on/off cycle that may prevent 

it from turning on while squeezing trigger after 

rapid squeezing. Use slow deliberate trigger pulls 

to avoid such symptoms.

OFF/0

ON/I

OFF/0

ON/I

•     

Always test

 a small area to avoid chance of 

damaging the surface.

•  Turn the tap on fully to ensure good water supply.

•    Make sure the “ON/OFF” switch is in the “OFF” 

position. The power switch has international symbols 

for ‘on’ and ‘off’: On (|) Off (O).

•    Unwind the power cord completely and plug it into a 

240 volt outlet.

•    Release safety push trigger lock up and back into 

trigger. While pointing the spray gun in a safe 

direction, squeeze the trigger on the spray gun until 

there is a steady stream of water, letting the water 

and air out of the hose. Push trigger lock back down 

to lock back into place. 

Summary of Contents for JETWASH SP160RLW

















Reviews: