8
ASSEMBLY INSTRUCTIONS
2
1
7
D
F
E
D
Variable Spray
Nozzle Lance and Turbo Nozzle
Lance Installation
While the spray gun (F) is in the locked position, insert
the variable spray nozzle lance (E) or turbo nozzle
lance (D) into the end of the spray gun, by inserting and
turning clockwise until fully in place. To remove turn
counterclockwise.
Note:
Turbo nozzle is not adjustable.
6
F
F
Lock
Unlock
I
I
Locking Spray Gun (before lance installation)
To lock the trigger of the spray gun, (I), aim the gun
away from you and push the lock button from right to
left. After doing so, squeeze or pull the trigger to make
sure it is locked and will not move. Always leave lock
button in locked position when not in use. This ensures
the gun is in “safe” mode until it is ready for use.
8
L
L
F
F
L
Rotary Brush Installation
The rotary brush is specially designed to clean rims and
vehicle wheels.
Screw the adapter for the spray gun onto the rotary
brush (L). Then screw to the spray gun (F) by pushing
together and turning clockwise.
To remove, turn counterclockwise.