![background image](http://html.mh-extra.com/html/sp/jetwash-sp160rlw/jetwash-sp160rlw_assembly-care-and-use-instructions_1338603007.webp)
7
ASSEMBLY INSTRUCTIONS
Note: DO NOT
use a power screwdriver. When all free
play has been taken up, give a small final clockwise
twist of the screwdriver.
DO NOT
overtighten.
4
B
F
3
M
AA
A
5
B
F
Screw
x 1
AA
AA
Scr
ew
Qty
.
1
Hardware Used:
High Pressure Hose Assembly
Connect the other end of high pressure hose (B) to
spray gun (F) by screwing collar over gun inlet. Hand
tighten (turning clockwise) until tight. Hose is now
securely attached to the spray gun.
Note:
High pressure hose (B) is fitted to the hose reel
and ready to use. It only needs to be attached to the
spray gun (F).
Slip tab of stabiliser foot (M) into slot on bottom right
of the pressure washer. Secure stabiliser foot (M) to
pressure washer (A) using screw provided (AA)
To release the hose (B) from spray gun (F), turn black
collar counterclockwise. Remove gun.