Rev 002, 08/12
9
© SP Scientific 2012
Chapter
3
Operation
Overview
The FTS BioCool™ 80 offers a continuous display of temperatures in 0.1 degree
increments and is capable of controlling temperatures within ± 0.1 °C across the
equipment’s full operating temperature range.
Operation
Powering On
Note:
Before powering on and cooling, install the magnetic stirrer and vortex breaker (as
described in Chapter 2: Installation) and fill the reservoir with fluid (as described in Chapter 4:
To activate the refrigeration system:
Toggle the on/off breaker switch to the On position.
1.
Main Breaker
Summary of Contents for FTS Systems BioCool 80
