background image

SY-P4VTE 

Quick Start Guide 

 

18

 

Th

e S

O

Y

O

 C

D

 

 

VIA SerialATA driver for Win 98SE/ME/2000/XP 

This program is for install Driver to use SerialATA function. 

 

Wasay Image It Utility for Win 98SE/ME/2000/XP

 

Data Image software 

 

Wasay Pro Magic Utility for Win 98SE/ME/2000/XP

 

ProMagic is an instant system recovery software that provides convenient instant 
restoration to the preferred state at any specific restore time point as desired.   

 

Wasay Data Processing Utility for Win 98SE/ME/2000/XP

 

Wasay Data Processing Utility is an instant file restoration program that not only 
provides convenient & instant file recovery but also helps to manage your files. 

 

Panda Anti Virus Utility for Win 98SE/ME/2000/XP

 

Anti Virus software for Windows 98SE/ME/2000/XP 

Select which driver you want to install and click 

OK,

 or click 

Cancel

 to abort the driver 

installation and return to the main menu.  

Note:

 Once you have selected a driver, the system will automatically exit the SOYO CD 

to begin the driver installation program. When the installation is complete, most drivers 

require a restart of your system before they become active. 

Step 3. 

Check the Latest Releases 

Click the 'Connect to SOYO website' button to go the SOYO Website to find the latest 

BIOS, manual and driver releases for your motherboard. This button will only work if 

your computer is connected to the internet through a network or modem connection. 

Make sure to get your internet connection up before clicking this button. 

Summary of Contents for SY-P4VTE































Reviews: