SY-P4VTE
Quick Start Guide
9
Har
dw
ar
e
Installa
ti
on
Step 2.
Configure Memory
Your board comes with 2 DIMM sockets, providing support for up to 2GB of main memory using
unbuffered and non-ECC DIMM modules. On this motherboard, DRAM speed can be set independent
from the CPU FSB speed.
Memory Configuration Table
Number of Memory
Modules
DIMM 1
DIMM 2
RAM Type
DDR RAM PC2100/PC2700/3200
(non-register & non-ECC)
Memory Module Size (MB)
128 / 256 / 512 / 1024 MB
Step 3.
Installation of Expansion Cards
The motherboard has 1 AGP slot and 4 PCI slots.
1. Read the related expansion card’s instruction document before inserting the expansion card
into the computer.
2. Press the expansion card firmly into expansion slot in the motherboard.
3. Make sure the metal contacts on the card are correctly seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5.
Install driver for the operating system you use.
Note:
AGP cards working on 3.3V are not supported. Only AGP cards working on 1.5V
can be used in this M/B. For AGP card voltage specification, please check the AGP card
manual or contact your AGP card’s manufacturer.
