SOYO SY-K7V DRAGON Plus User Manual Download Page 137

Page: 137 / 203

133

[ Adapter Configuration - Options ]

Halt On Error:

Enable

[ System Resources Configuration ]

Channel 1 (IDE1)

Interrupt : A I/O Port : FFF0

Channel 2 (IDE2)

Interrupt : A I/O Port : FFA8

[ Keys Available ]

[

←

→

, Space] Change Option [ESC] Exit

Halting FastTrak BIOS On Bootup Errors

The [Adapter Configuration – Options] section allows you to enable or disable

FastTrak100-Lite to Halt operation at the BIOS startup screen should an error be

detected. This is the only option that can be changed on this screen.

Installing Drivers

This section details the FastTrak100-Lite driver installation when used with various

operating systems. The software includes the driver necessary to identify

FastTrak100-Lite to the operating system.

•

For Windows 2000, see below.

•

For Windows 95/98, see page 136.

•

For Windows 4.x, see page 139

WINDOWS 2000

Installing Driver During New Windows 2000 Installation

1a. Floppy Install: Boot the computer with the Windows 2000 installation

diskettes.

1b.

Floppyless Install: Boot from floppy and type “WINNT”. After files have
been copied, the system will reboot. On the reboot, press <F6> after

Summary of Contents for SY-K7V DRAGON Plus












































































































































































































Search results

Summary of Contents for SY-K7V DRAGON Plus

Reviews:

Related manuals for SY-K7V DRAGON Plus

Brands by name

Popular brands

SOYO SY-K7V DRAGON Plus, User Manual

Search results

Summary of Contents for SY-K7V DRAGON Plus

Reviews:

Related manuals for SY-K7V DRAGON Plus

Brands by name

Popular brands