144
3. FastCheck will no longer be running and will no longer be monitoring
the array.
USING FASTCHECK ARRAY WINDOW
Once FastCheck is selected, the FastCheck Monitoring Utility window will appear.
The main pane has three information window tabs: Array, Controller, and Options.
The user can switch screens by clicking on the tab. The Array Window is the active
screen by default as shown below:
The Array Window (see above) displays information about the arrays configured on
your FastTrak100-Lite through the FastBuild BIOS. From this window, you can
also perform data Synchronization of mirrored arrays, or Rebuild data from one
drive to a replacement drive within a mirrored array.
While the Array Window does not allow you to change the array configurations
directly, it clearly identifies which drives are associated with each array shown in
the left pane.