SOYO SY-K7V DRAGON Plus User Manual Download Page 147

Page: 147 / 203

143

NOTE

: Promise recommends to have FastCheck load during Startup. This

insures you that it will be ready to post alerts on errors.

RUNNING FASTCHECK

As described in the Installation section, the default option for FastCheck is to load

during startup of Win95/98/NT/2000. It appears minimized on the taskbar under

Win 95/98/NT4/2000/Millennium (see below).

To start FastCheck, double-click on the FastCheck icon on the taskbar (above) or

you may also use the Taskbar Start/Promise/FastTrak/FastCheck menus shown

below.

CLOSING FASTCHECK

Once FastCheck is opened (either automatically on startup or manually), the

monitoring utility remains running in the background even if the user “closes” the

FastCheck window.

To completely shut down FastCheck, perform the following steps.

1. Right-click the FastCheck icon on the Taskbar.

2. Select Exit from the pop-up window.

Summary of Contents for SY-K7V DRAGON Plus












































































































































































































Search results

Summary of Contents for SY-K7V DRAGON Plus

Reviews:

Related manuals for SY-K7V DRAGON Plus

Brands by name

Popular brands

SOYO SY-K7V DRAGON Plus, User Manual

Search results

Summary of Contents for SY-K7V DRAGON Plus

Reviews:

Related manuals for SY-K7V DRAGON Plus

Brands by name

Popular brands