SOYO SY-7SBB, User Manual

Page: 64 / 76

BIOS Setup Utility SY-7SBB
60
3-8.1 IDE Device Controls
IDE Controls Setting Description Note
Both Default Internal PCI/IDE
Primary
Secondary This chipset contains a
internal PCI IDE
interface with support for
two IDE channels.
mode 0-4 0 is the slowest speed
4 is the fastest speed IDE
Ø
Primary Master PIO
Ø
Primary Slave PIO
Ø
Secondary Master PIO
Ø
Secondary Slave PIO
Auto For better performance
and stability, we suggest
you use the Auto setting
to set the HDD control
timing. Default
Disabled
Ø
Primary Master UDMA
Ø
Primary Slave UDMA
Ø
Secondary Master UDMA
Ø
Secondary Slave UDMA
Auto Select Auto to enable
Ultra DMA Mode
support. Default
Disabled
IDE Burst Mode
Enabled
Selecting Enabled reduces
latency between each drive
read/write cycle, but may
cause instability in IDE
subsystems that cannot
support such fast
performance.
Default
Disabled IDE HDD Block Mode
Enabled
Disable this item if your
HDD does not support
block mode.
Default
3-8.2 FDC Controls
FDC Controls Setting Description Note
Disabled Turn off the on-board floppy
controller
Onboard FDC
controller
Enabled Use the on-board floppy controller Default