SOYO SY-7SBB, User Manual

Page: 31 / 76

Hardware Installation SY-7SBB
27
3.3V
-12V
GND
PS-ON
GND
GND
GND
-5V
5V
5V
3.3V
3.3V
GND
5 V
GND
5 V
GND
PW-OK
5VSB
12V
ATX Power
Warning: Follow these precautions to preserve your
Motherboard from any remnant currents when connecting to
ATX power supply:
Turn off the power supply and unplug the power cord of the
ATX power supply before connecting to ATX PW connector.
The Motherboard requires a power supply with at least 200 Watts and a
"power good" signal. Make sure the ATX power supply can take at least
720 mA * load on the 5V Standby lead (5VSB) to meet the standard ATX
specification.
* Note: If you use the Wake-On-LAN (WOL) function, the current
requirement is even more critical, make sure to use an ATX powersupply
that can at least supply 720mA on the 5STB line.
Please install the ATX power according to the following pin assignment:
Ø
Pay special care to the notch.