
Settings
Operating Instructions Soyer Bolzenschweißtechnik
47
13. Settings
The stud welding device and the stud welding gun must be matched and adjusted
for the respective work.
13.1 Adjusting the charging voltage on the stud welding device
In the following, it is described how the charging voltage is adjusted.
In order to achieve an optimal stud welding result, carrying out some test welds
with different settings is necessary.
The charging voltage to be set on the stud welding device depends, among oth-
ers, on the following influencing factors:
• Material of the workpiece
• Thickness of the workpiece
• Material of the welding stud
• Diameter of the welding stud
With the arrow keys on the display, the charging voltage or the stud diameter can
be adjusted.
The charging voltage or the stud diameter is indicated on the display.
Display of charging volt-
age in volt.
With the arrow keys,
the charging voltage can
be adjusted in steps of
1 volt.
Display of the stud diame-
ter.
d-3 is equivalent to a
charging voltage of
70 volt. Please refer to the
table on the front panel.
Table on the front panel.
The charging voltage is fixed to the stud diam-
eter and cannot be changed when displaying
the stud diameter.
Switch to the display of the charging voltage to precisely adjust the charging
voltage.
70
Ø 3
100
Ø 4
115
Ø 5
140
Ø 6
175
Ø 7
190
Ø 8
000