Soyer BMS-10N, Operating Instructions Manual, Page: 8 / 69

i
Contents
R
Contents
1 General ___________________________________________________________________________ 1-1
1.1 The following should be principally observed ... ____________________________________________ 1-1
1.2 Application __________________________________________________________________________ 1-2
1.3 Information on the product _____________________________________________________________ 1-2
1.4 Type plate ___________________________________________________________________________ 1-2
1.5 Information on the documentation _______________________________________________________ 1-3
1.5.1 Chapters of operating instructions _______________________________________________________ 1-3
1.5.2 Information on operating instructions ____________________________________________________ 1-4
1.5.3 Conduct in the case of malfunctions _____________________________________________________ 1-4
1.6 Contacts and service address __________________________________________________________ 1-4
2 Description of stud welder ________________________________________________________ 2-5
2.1 Tip ignition technology ________________________________________________________________ 2-5
2.2 Stud welder set-up ___________________________________________________________________ 2-5
2.3 Dimension ___________________________________________________________________________ 2-6
2.4 Technical Data _______________________________________________________________________ 2-7
2.5 Block diagram _______________________________________________________________________ 2-8
2.6 Interface ____________________________________________________________________________ 2-9
2.7 Alteration of supply voltage ____________________________________________________________ 2-10
3 Safety instructions _______________________________________________________________ 3-11
3.1 Description of reference signs in the operating instructions _________________________________ 3-11
3.2 Staff qualification and training __________________________________________________________ 3-12
3.3 Dangers in the case of non-compliance with safety instructions _____________________________ 3-12
3.4 Safety-conscious working _____________________________________________________________ 3-12
3.5 Safety instructions for the operator/user _________________________________________________ 3-12
3.6 The following should be observed before starting the system ... _____________________________ 3-13
3.7 Before starting welding ... _____________________________________________________________ 3-14
3.8 Safety precautions at installation site ____________________________________________________ 3-14
3.9 Working with the stud welder __________________________________________________________ 3-14
3.10 Safety instructions for maintenance, inspection and assembly works _________________________ 3-15
3.11 Unauthorized retrofit and spare parts production _________________________________________ 3-15
3.12 Inadmissible operating methods _______________________________________________________ 3-15
3.13 Stopping the stud welder _____________________________________________________________ 3-15
3.13.1 Stopping the stud welder when welding with normal operation ______________________________ 3-15
3.13.2 Stopping the stud welder when welding with automatic operation ___________________________ 3-16
3.14 The "S" symbol ______________________________________________________________________ 3-16
4 Installation of stud welder ________________________________________________________ 4-17
5 Initiation _________________________________________________________________________ 5-18
5.1 Front and rear view __________________________________________________________________ 5-18
5.2 General description __________________________________________________________________ 5-19
5.2.1 Operating elements __________________________________________________________________ 5-20
5.2.2 Display elements ____________________________________________________________________ 5-20
5.2.3 Connecting elements _________________________________________________________________ 5-20
5.2.4 Fuse _______________________________________________________________________________ 5-21
5.2.5 Symbols ___________________________________________________________________________ 5-22
5.3 Preparation for initiation _______________________________________________________________ 5-23
5.3.1 Earth connection ____________________________________________________________________ 5-23
5.3.2 Connection of stud welding pistol ______________________________________________________ 5-24
5.3.3 Mains supply ________________________________________________________________________ 5-24