Soyer BMS-10N, Operating Instructions Manual, Page: 24 / 69

3-14
Safety instructions
R
3.7 Before starting welding ...
• Check the state of all cables before starting to weld.
• Immediately replace defective cables and cable connections.
• Ensure that the air apertures of the housing are not covered. Heat accumu-
lation may damage the stud welder.
3.8 Safety precautions at installation site
• When placing the stud welder on tables or similar workshop furniture,
ensure that the stud welding system stands firmly and that the table can
bear its weight.
• Make sure mains socket and stud welder are properly earthed.
• Comply with fire prevention regulations and do not weld in hazardous
locations.
• Make sure room is well ventilated or extract welding fumes, if necessary.

DANGER TO HEALTH
When welding, fumes and suspended matters may be generated . Beware
of fumes detrimental to health, particularly when using surface-treated
materials. If possible, only weld in rooms which are higher than 3 m. As per
VBG 15, special regulations are applicable for narrow rooms.
3.9 Working with the stud welder
• Comply with all accident prevention regulations which apply to the operation
of your stud welder
One of the accident prevention regulations applicable for stud
☞
welders is VBG 15 "Welding, cutting and similar working
methods". For more information, contact the Employer's
Liability Insurance Association.

MORTAL DANGER
When welding, do not wear clothes soiled with easily combustible
substances such as oil, grease and paraffin oil, etc.