OPERATION & MAINTENANCE MANUAL
page 27 Release 2017
Remember to tighten the belts correctly.
A high number of worn belts in a short time is not
normal. Please check that the rotor rotates freely
without obstacles blocking its movement.
•
Make sure the knives are still sharp and that they do not show signs of breakages or
excessive wear. In case their replacement is needed, always use original knive
supplied by the manufacturer.
•
Verify the oil level in the gearbox. Remove the oil level plug (see figure below) and
check that the oil flows out. To add oil, unscrew the filler plug located above the
gearbox and proceed with the filling until the oil runs out of the level hole.
EVERY 50 WORKING HOUR
•
For those versions of the machine equipped with rear roller, proceed to grease its
lateral supports. Before greasing, clean the grease nipple correctly to avoid the
entrance of dirt, grass and mud. Use lithium type grease NLGI2.
• For versions equipped with rear wheels, lubricate the wheel’s articulated supports.
Before lubricating, clean the grease nipple correctly to avoid the entrance of dirt,
grass and mud. Use lithium type grease NLGI2
FILLER PLUG
LEVEL PLUG
VENT PLUG