OPERATION & MAINTENANCE MANUAL
page 13 Release 2017
•
Connect the 3rd point of the tractor to the high plates of the implement by using a
pin and a cotter key (fig. 1).
•
Lift the implement and fix the stand support high in its socket with the supplied pin.
•
Lower the implement and adjust it so that it is parallel to the ground. Do this by
adjusting the 3rd point drawbar (fig. 2). This will improve the life-span of the
implement and the PTO.
•
Connect the PTO shaft and make sure it is correctly connected to the tractor and to
the implment.
NOTE ON THE PTO SHAFT
Always refer to the manufacturer’s instruction manual. Read it carefully.
Fig.2
NO!
YES!