Sovan's CBD25T Operation Manual Download Page 18

Page: 18 / 62

Storage

battery

Charge

Confirm the display state of the battery capacity.

Electrolyte

The solution level and density of electrolyte.

Connecting line

The connecting line and socket shall be firm.

Horn

Press down the horn button to check whether

the horn sounds.

Instrument

Function

Turn on the switch of electric lock to check
whether the instrument displays normally.

Others

Truck frame, etc

Damaged or not. If there is any crack.

Function

Check that whether lifting, lowering, forward &
backward movement and emergency reverse of

the truck is normal, and if there is any abnormal

noise.

Ⅶ.

Inspection after operation:

After operation, the smudge on truck shall be wiped out. Besides, the following check shall be carried

out:

Keep visibility of all graphics context marks such as warning signs, nameplate and notice board. These marks
are able to instruct, caution and warn the operator to some degree.

The situation about deformation, distortion, damage or breakage
Add lubricating oil and grease if necessary.

Replace faulty components

。

Ⅷ.

Periodic maintenance and repair

：

Comprehensive check for truck can avoid malfunction and ensure the service life. The hours listed in

maintenance procedures is based on the cases that the truck works for 8 hours per day and 200 hours per

month. For the sake of safety, maintenance shall be carried out according to maintenance procedure.

Notice

All the repair work shall be carried out by professional personnel

Please contact the sales department of our company if you need to adjust or replace the components

。

Precautions during maintenance

：

Notice

The components for replacement shall be produced completely by our

company. When replacing components of the truck, the components with the

same safety requirement with the original design shall be used.
The lubricating oil and hydraulic oil in use shall be recommended by our

company.

⑴

Places for maintenance

：

Notice

The places for maintenance shall be appointed and can provide other
services such as hoisting and safety protection facility etc.

The places shall have level ground and good ventilation.

The places shall be equipped with fire-extinguishing devices

。

⑵

Precautions before repair and maintenance

：

Summary of Contents for CBD25T































































Search results

Summary of Contents for CBD25T

Reviews:

Related manuals for CBD25T

Brands by name

Popular brands

Sovan's CBD25T, Operation Manual

Search results

Summary of Contents for CBD25T

Reviews:

Related manuals for CBD25T

Brands by name

Popular brands