•
Make sure CHARGE LED on base is lit when handset is in cradle.
•
If necessary, replace handset battery. (See Handset Battery Charging)
Difficulty in placing or receiving calls:
•
Move closer to base and try again.
•
If moving closer doesn’ t work, you may have lost security code. Reset code by placing handset back
on base for 5-10 seconds. (See Security Code section)
•
Make sure you have selected correct dialing mode, tone or pulse.
•
Make sure AC adaptor is not plugged into wall outlet with other appliances.
Disconnect for 5-10 seconds then reconnect. Place handset back on base and then replug AC adaptor.
•
Make sure handset battery is fully charged.
•
If using a headset(not included), make sure you are using a headset that has a 3/32 inch (2.5mm) plug.
Make sure the microphone is placed near your mouth.