until it is securely in place.
2. Insert AC adaptor into back of base unit.
3. Insert one end of short line cord into back of base unit, passing line cord through the groove.
4. Plug other end of line cord into modular jack.
5. Mount base on wall plate studs and gently press until the unit locks in place.
6. Plug AC adaptor directly into standard 120 volt outlet.
Desk Top Installation
1. To connect the Desk/Wall mount bracket in the desk/table position align the bracket with the slots on the
base until it is securely in place.
2. Plug one end of line cord into back of base unit.
3. Plug other end of line cord into modular jack.
4. Press until locking lever clicks.
5. Connect AC adaptor into back of unit and plug directly into standard 120 volt outlet.
Antennas
Adjust base antenna to upright position.
Set Tone/Pulse Switch
Set switch (back of base) to correct dialing mode
TONE
or
PULSE
.
Please check with local phone company if uncertain of type of service
.