Ringer On/ Off
Set switch (left side of handset) to
ON
or
OFF
. Ringer switch must be ON for handset to ring during
incoming calls.
Receiver Volume Control
Adjust the receiver volume form low (
¡ å
)
to high (
¡ ã
)
Handset Battery Charging
The battery pack in the handset must be fully charged 10-14 hours before using the telephone for the first
time.
1. Place handset in base. The
CHARGE LED
on base will light.
2. After batteries are fully charged, check for dial tone by pressing
TALK
on handset.
4. When handset battery gets low, there will be 2 beeps every 30 seconds.
The
TALK
BUTTON will flash. Return to cradle for charging.
5. If battery becomes low while you are on a call, you will be disconnected after about 2 minutes.
Terminate the call quickly and recharge battery.
To recharge battery pack, place handset in base and:
1. Make sure contact points are touching and
CHARGE LED
is lit.
2. Be careful not to short battery with conducting materials such as rings, bracelets and keys.