Questions? Call Toll Free at 1-800-737-2112
Copyright © 2018 MAT Engine Technologies, LLC
ENG -
2
Oil Fill Location
Do Not Overfill
Gasoline Fill Location
Do Not Overfill
On/Off Switch
Switch to “OFF” to stop unit
PUSH TO PRIME
Push primer 3 times before starting a cold
engine - may not be required to restart a warm
engine.
Rotate index lever to change airflow angle:
15º down, Level, 15º up
Instructions for attaching Front Flow Attachment
to Unit
Instructions for storing Front Flow Attachment
under frame
Instructions of Front Flow Attachment storage on unit
Look for this symbol to point out important safety pre-
cautions. It means: Attention! Become Alert! Your Safety
Is Involved.
Wear eye protection complying with ANSI Z87.1 and
hearing protection.
Read operator’s manual before operating this machine.
Failure to follow directions could result in serious injury.
Disconnect spark plug wire when not in use or before ser-
vicing, cleaning, or performing maintenance on the unit.
Do not use if children or bystanders are present.
Engine exhaust contains carbon monoxide, an odorless
and deadly gas. NEVER run unit indoors or in a poorly
ventilated area.
Unit will blow objects and debris at high speeds. Never
stand in front of discharge chute. Never allow discharge
chute to point toward bystanders, pets, or valuable
property.
Do NOT touch hot muffler or cylinder. These parts are
extremely hot from operation and may remain hot for a
short time after operation.
There are rotating blades inside the blower which can
cause serious injury. Keep hands out of intake and
discharge openings. Never insert foreign objects such as
sticks or tools into the intake guards or discharge chute.
To reduce risk of fire, clean spilled gas and oil and keep
unit free from debris. Gasoline is extremely flammable.
Allow machine to cool completely before refueling.
Do NOT operate machine without shields, guards, and safety devices (e.g. intake guard) in place and working.
Safety Definitions
• Save these instructions
Safety Warning Symbols
Control and Operating Symbols
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor/moderate injury or
equipment/property damage.
NOTICE
Indicates a situation which may result in equipment / property damage or may relate to general safety
messages.
The following symbols are used on the product and in this manual to alert the operator of potential safety hazards.
Read them carefully, and understand their meaning.
Safety Alert Symbols
The following symbols can be found on your blower. Carefully read and understand their meaning.
Important Safety Information
