![background image](http://html1.mh-extra.com/html/southern-states/cvb-2/cvb-2_installation-instructions-manual_1337419014.webp)
Page 5 of 21
Receiving, Handling & Storage
Receiving, Handling & Storage
Unpacking
The CVB-2 switch consists of: Live parts – blades with hinges, terminal pads and contacts;
base housing with mounting angles attached; insulators; interphase and control pipes with
hardware; and outboard bearing and operator.
Unpack the equipment and check for damages or material shortages immediately. The bill-of-
materials from the Unit Assembly (switch) and Operating Mechanism drawings should be used
for this purpose. If damage or a shortage is noted, file a claim immediately with the carrier and
contact the factory.
Storage
All components of the CVB-2 vertical break disconnect switch are suitable for outdoor use.
Keep bearings out of standing water. Keep upright and support live parts with base. If a motor
operator is furnished, be sure to connect the heater circuit using the provided external wiring,
while the unit is in storage. Discard the wiring upon installation.
Typical crating is intended for storage less than 1 year
. If long term storage is required please
notify factory at time of order placement so that special crating can be used.
Summary of Contents for CVB-2
